A. NEW EQUIPMENT WITH WARRANTEES

  1. New IFP Cast Film & Sheet Line with 45mm to 90mm Extruder, 12” to 50” Dies, Cooling Roller system & Winder.  Pictures justadded.gif (2922 bytes)
  2. IPD Dual Lip Air Rings. From 2" to 20". Options: Rotating; Blowers; Air Separators.  Picture

B. PRODUCTION LINES (PRE-OWNED)

Call or e-mail for info.

 


C. EXTRUDERS & SUPPORT EQUIPMENT (PRE-OWNED)

  1. Gloucester 4 ½” 24:1 LB Extruder with 50hp DC system, Temp. Control Panel & new Screw.  Pictures justadded.gif (2922 bytes)
  2. Gloucester 4½” 24:1 LB Extruder with Temp. Control Panel & Motor Drive.  Pictures justadded.gif (2922 bytes)
  3. Sano 18” Mono-Layer Die System with Dual Lip Air Ring, Rotator, Screen Changer, Stand, Blower & Rebuild Kits.  Pictures justadded.gif (2922 bytes)
  4. Buffalo 30hp Blower with AC Inverter.  Picture justadded.gif (2922 bytes)
  5. Buffalo 20hp Blower with AC Inverter Speed Control.  Picture justadded.gif (2922 bytes)
  6. New York 15hp Blower with AC Inverter Speed Control.   Picture justadded.gif (2922 bytes)
  7. Primary Rubber Nip Roll with 2½” Shafts.  Picture
  8. Gloucester 3½” Extruder Screw.  Picture
  9. Gloucester 54” Primary Nip Roll Assembly with DC Drive Motor, Controls & Collapsing Frames.  Picture
  10. Gloucester 34” Primary Nip Roll Assembly with DC Drive, Collapsing Frames & Controls.  Picture
  11. Gloucester 54” Primary Nip Roll Assembly with Drive Motor, Collapsing Frames & Controls. Picture
  12. Reliance 200hp DC Controller.   Picture Western 16” Spiral Die with all Heaters & spare Linear Low Pin.  Pictures 
  13. Sano 16" Co-X 3-Layer Die System with IBC Ports, Plenum, Air Ring, Cart & Controls.  Pictures 
  14. Gloucester 25" Spiral Die with Cart & Dual Lip Air Ring.  Picture
  15. Three (3) Macro Zipper dies - (1) 15", (1) 16" & (1) 17" - all like new.  Pictures 
 

D. BAG MACHINES, SEPARATORS & FOLDERS (PRE-OWNED)

  1. Amplas 50” Film Collector Dancer system.  Pictures
  2. AMI Bead Strand Unwind Stand.  Picture
  3. Branson Model 900 Sonic Sealer Unit.  Picture
  4. Two (2) STS Adhesive Processing systems for pressure sensitive sealing.  Pictures
  5. Three (3) Southworth Product Stacking Tables.  Picture
  6. Dozens of Shaft & Bladder Core Chucks.  Picture
  7. New Fifeguide Pump.  Picture
  8. Three (3) Roton Vacuum Blowers.   Picture
  9. Famco 36" Shear with Stacker Table, Clamp & Unwind.   Pictures
  10. 2005 Ro-An 50" Double V-Folder with Nip Roll Assist.  Pictures 
  11. ITW Adhesive Processing system for pressure sensitive closures.  Picture justadded.gif (2922 bytes)

E. WINDERS, UNWINDS & SLITTERS (PRE-OWNED)

  1. Amplas 34” Dual Station large-roll Unwind system with Air Friction Brake, Manual Film Center, Dancer Film Collector & Slitter attachment.  Picture justadded.gif (2922 bytes)
  2. Two (2) Gloucester 26" Model 163 3-Spindle Cantilever Winders with Input Nip Rolls & Dancer Tension.   Picture
  3. Amplas 60" Model UN-D Unwind Stand.  Picture
  4. Sano 80" large-roll (40" diameter) Single Turret Winder with Input Nip Rolls & Dancer Tension. 2,200# 3" Air Shafts. Prime condition.  Picture
  5. Filmaster 74" Dual Surface Winder with Input Nip Rolls, Dancer Tension Controls & large Diameter Rolls (prime condition).  Pictures 
  6. Several Large & Small Unwind Units.

 


F. PRINTING PRESSES (PRE-OWNED)

  1. Harley Model P-1884 Opti-Chek Mounter Proofer.  Pictures
  2. UTECO 42” Model Silver 412 Stack Flexo in or out-of-line Press.  Pictures
  3. Pillar/Solo Treater Stations with Power Units & Controls.  Pictures justadded.gif (2922 bytes)

 

 


G. INJECTION, BLOW, VACUUM MOLDERS & THERMOFORMERS (PRE-OWNED)

Call or e-mail for info.

 


H. RECYCLING & MATERIAL HANDLING EQUIPMENT (PRE-OWNED)

  1. Foremost 4-Component Gravimetric Resin Blender with optional 7½ hp Resin Vacuum Pump.   Pictures justadded.gif (2922 bytes)
  2. Miscellaneous Silos.   Picture justadded.gif (2922 bytes)
  3. Recycling special package: Alpine 5”/3” Repro Extruder with 100hp AC Drive system & Screen Changer. Gala Water Ring Pelletizer & Spin Dryer.  Pictures
  4. Walton Stout 15hp Resin Vacuum Pumping system with muffler & filter.  Pictures
  5. Process Control Inline Trim Chopper/Blower.  Pictures
  6. 1,000# boxes of Spartec Redwood brown color Concentrate.  Pictures

I. FORKLIFTS & LOADERS (PRE-OWNED)

  1. Clark 2,500# Propane Forklift.  Picture justadded.gif (2922 bytes)

J. MISCELLANEOUS EQUIPMENT (PRE-OWNED)

  1. Acme 50-Ton closed-loop Water Chiller system & Cooling Tower.  Pictures justadded.gif (2922 bytes)
  2. Three (3) Davis Standard 21’ Water Bath Spray Cooling Tunnels with all Pumps & Controls. New.  Pictures justadded.gif (2922 bytes)
  3. Sixteen (16) misc. Transformers.   Picture justadded.gif (2922 bytes)
  4. Wiegman Roll Upender with Controls – four (4) in stock.   Picture
  5. Several 44” Chrome, Rubber & Matte finish Chill Rolls with Storage Carts.  Picture
  6. Two (2) Toledo Scales. one (1) 250# and one (1) 500#.  Picture
  7. Allen Bradley PLC-5 Programmable Controller.  Pictures
  8. Two (2) Westinghouse 15hp DC Torque Motors.  Picture
  9. Reliance 5hp DC Motor.  Picture
  10. Blue M 30°c to 260°c Oven with 120 Volt system.   Picture
  11. Roll & Cylinder Rack.   Picture

We encourage offers on all items listed.
Some items as much as 50% off market with even larger savings if purchased at their present location.

Wanted: All Dies, Air Rings, Die Stands, Resin Moving Equipment, Used Fork Lifts & Bob Cat "Type Loaders.

 

Advise viewing prior to purchase. All sales are on an "as-is where-is" basis with no implied warranties.

If you wish to be removed from our FAX or mailing list, please let us know (include pertinent information).

Some equipment specifications may vary.